22 Inch Gas Powered Chain Saw, 2.4KW 52CC Gasoline Chainsaws with Bar Cover, 2-Cycle Power Chain Saw for Wood Cutting and Tree Pruning

<p><b><i>Details</i></b><br>Tool Bag: It can help you organize your accessories in an orderly manner, making it easy for you to carry around and effectively preventing accessory loss. </p> <p>Fuel Tanks: The 18.6Oz translucent fuel tank and 4.73Oz chain fuel tank allow for large capacity, a convenient mixture of fuels, and long-term use without frequent filling.</p> <p>Double Nuts and Piston Rings: The guide plate is fixed with double bolts to ensure the stability of the product and make the chain not easy to loosen. The rings make the product sealing performance better, which can increase the machine's power.</p> <p>Guide Bar Cover: It allows for convenient storage and better protection of the guide bar when not in use.</p> <p><b><i>Specification</i></b><br>Color: Orange<br>Style: Modern<br>Model: 5800<br>Assembly Required: Yes<br>Material: Nylon, Mn Steel, Aluminum<br>Engine Type: Single Cylinder, Air-cooled, 2-Stroke<br>Ignition System: Self-reset Pull Start<br>Fuel Tank Capacity: 550ml/18.6Oz<br>Chain Fuel Tank Capacity: 140ml/4.73Oz<br>Bore: 45.2mm/1.78inch<br>Volume: 116dB<br>Power: 2.4kw<br>Speed: 10000rpm<br>Displacement: 58cc<br>Oil Mixture: 25:1(90# Gasoline: Oil) <br>Chain Length: 50cm/20inch<br>Max. Cutting Diameter: 50cm/20inch<br>Overall Size: 91*24*29cm/35.82*9.44*11.41inch<br>Package Size: 50*27*30cm/19.68*10.63*11.81inch<br>Gross Weight: 7.5kg/16.53 lbs<br>Net Weight: 7kg/15.43 lbs</p> <p><b><i>Package Included</i></b><br>1* Gas Chainsaw<br>1* Chain<br>1* Guide Bar<br>1* Chain Bar Cover<br>1* Fuel Tank<br>1* Tool Bag<br>1 Pair* Gloves<br>1* Screwdriver<br>1* Funnel<br>1* English Manual<br>Other Accessories for Assembly</p> <p><b><i>Notes</i></b><br>1.Before starting the gasoline chainsaw, please ensure that it fits well with the guide bar, and use a wrench to adjust the chain. When installing the guide bar, please note that the screw column on the side cover must be aligned with the guide bar hole before installation(The function of the screw column is to adjust the chain tightness.). <br>2.Please use gasoline 90# with special 2-cycle engine oil and never use pure gasoline. Gasoline and oil mixture ratio: 25:1. The oil output can be controlled to turn larger to the left and smaller to the right. <br>3.Please note that after the first ignition sound, closing the choke and repeatedly pulling the start handle will suck in too much fuel and prevent the engine from starting. <br>4.If the choke knob is not fully pushed back after pulling the starter handle up to 6 times, the engine preheating may be missed. Too much fuel will flow out and submerge the spark plug. Then you can't start the chainsaw. The damper is used to regulate air intake. When the engine is cold or not used for a long time, the damper needs to be pulled. If the engine is hot, it can be started directly. This is the same as the principle of starting a motorcycle! Close the damper, pull the start handle again 1-3 times to start it, and then you can use it normally.<br>5.Please pay attention to the tightness of the chain during installation (Pull the chain by hand. The distance between the chain and the guide plate is 0.12-0.2 inches.), otherwise, it will affect the use effect.<br>6.After the chainsaw is started (The oil filler door must be empty.), it must wait for the chain to receive oil before starting to work(The oil pump will discharge oil and the ground will become wet.).<br>7.The carburetor must be cleaned after every 100H of operation before use. The air filter must be cleaned after 8H of operation. When the chainsaw is not in use, it is better to pack it in plastic bags to avoid dust and water entering the machine and affecting its use. If the chainsaw is not used for a long time, the fuel oil in the tank must be cleaned.<br>8.Please read the manual and product labeling completely before installation and use, and pay particular attention to the safety instructions included. </p>

• [Superior Performance] Components such as a double coupling engine with 58cc displacement, 10,000rpm speed and 2.4KW power, and a highly magnetic flywheel with a thickened blade design for fast cutting, provide outstanding performance.
• [Cost Savings] The combination of high-quality carburetor and automatic lubrication system makes chain and bar supply stable and economical, reducing friction and lubricant consumption, improving cutting performance and extending service life.
• [High Safety] Dual protection switch design prevents accidental starting, heat sink holes ensure good heat dissipation, inertia start chain brake, gloves and wider brake stops are designed to protect the user's safety and avoid injury.
• [Convenient and Comfortable] Hand-pull spring-loaded starter handle, high-quality spark plug, safety switch and throttle switch are designed to be easy to use, cordless design and non-slip shock-absorbing ergonomic handle make the operation easier and more comfortable, and mute and shock-absorbing design reduces noise and vibration.
• [Wide Range of Application] Suitable for forest harvesting, cutting wood, pruning branches, gardening, home carpentry, bamboo saw, logging, light felling, DIY handicrafts and many other scenarios to meet different needs.